Adjusting Print Head Position
Print head alignment corrects the installation positions of the print head and improves deviated colors and lines.
The procedure for performing print head alignment is as follows:
Note
- If you are adjusting the head position while the software is being installed from the Setup CD-ROM, start from Step 3.
Print Head Alignment
Click Print Head Alignment
The Print Head Alignment dialog box opens.
Load paper in printer
In the rear tray, load 2 sheets of plain A4-sized or Letter-sized paper.
Execute head alignment
Make sure that the printer is on and click Start.
Follow the instruction in the message.Important
- Do not open the cover while printing is in progress; otherwise, printing will stop.
Check printed pattern
In each entry field, enter the number of the pattern with the least prominent streaks or stripes from among the printed patterns.
You can also enter numbers into the entry fields automatically by clicking relevant pattern in the preview.After completing the entries, click OK.
Note
- If the patterns are not uniform, select the pattern with the least prominent vertical streaks.
(B) More prominent vertical streaks - If the patterns are not uniform, select the pattern with the least prominent horizontal stripes.
(B) More prominent horizontal stripes
- If the patterns are not uniform, select the pattern with the least prominent vertical streaks.
Confirm the displayed message and click OK
The second pattern is printed.
Important
- Do not open the cover while printing is in progress; otherwise, printing will stop.
Check printed pattern
In each entry field, enter the number of the pattern with the least prominent stripes from among the printed patterns.
You can also enter numbers into the entry fields automatically by clicking relevant pattern in the preview.After completing the entries, click OK.
Note
- If the patterns are not uniform, select the pattern with the least prominent horizontal stripes.
(B) More prominent horizontal stripes
- If the patterns are not uniform, select the pattern with the least prominent horizontal stripes.
Complete head position adjustment
Click OK.
The adjustment of the head position is complete.
Note
- To print and check the current setting, open the Print Head Alignment dialog box, and click Print Alignment Value.